Lab 2 - Scale Application

In this lab, you'll learn how to update the number of instances a deployment has and how to safely roll out an update of your application on Kubernetes.

For this lab, you need a running deployment of the guestbook application from the previous lab. If you deleted it, recreate it using:

kubectl create deployment guestbook --image=ibmcom/guestbook:v1

1. Scale apps with replicas

A replica is a copy of a pod that contains a running service. By having multiple replicas of a pod, you can ensure your deployment has the available resources to handle increasing load on your application.

  1. kubectl provides a scale subcommand to change the size of an existing deployment. Let's increase our capacity from a single running instance of guestbook up to 10 instances:

    kubectl scale --replicas=10 deployment guestbook

    Kubernetes will now try to make reality match the desired state of 10 replicas by starting 9 new pods with the same configuration as the first.

  2. To see your changes being rolled out, you can run:

    kubectl rollout status deployment guestbook

    The rollout might occur so quickly that the following messages might not display:

    $ kubectl rollout status deployment guestbook
    Waiting for rollout to finish: 1 of 10 updated replicas are available...
    Waiting for rollout to finish: 2 of 10 updated replicas are available...
    Waiting for rollout to finish: 3 of 10 updated replicas are available...
    Waiting for rollout to finish: 4 of 10 updated replicas are available...
    Waiting for rollout to finish: 5 of 10 updated replicas are available...
    Waiting for rollout to finish: 6 of 10 updated replicas are available...
    Waiting for rollout to finish: 7 of 10 updated replicas are available...
    Waiting for rollout to finish: 8 of 10 updated replicas are available...
    Waiting for rollout to finish: 9 of 10 updated replicas are available...
    deployment "guestbook" successfully rolled out
  3. Once the rollout has finished, ensure your pods are running by using:

    kubectl get pods

    You should see output listing 10 replicas of your deployment:

    $ kubectl get pods
    NAME                        READY     STATUS    RESTARTS   AGE
    guestbook-562211614-1tqm7   1/1       Running   0          1d
    guestbook-562211614-1zqn4   1/1       Running   0          2m
    guestbook-562211614-5htdz   1/1       Running   0          2m
    guestbook-562211614-6h04h   1/1       Running   0          2m
    guestbook-562211614-ds9hb   1/1       Running   0          2m
    guestbook-562211614-nb5qp   1/1       Running   0          2m
    guestbook-562211614-vtfp2   1/1       Running   0          2m
    guestbook-562211614-vz5qw   1/1       Running   0          2m
    guestbook-562211614-zksw3   1/1       Running   0          2m
    guestbook-562211614-zsp0j   1/1       Running   0          2m

Tip: Another way to improve availability is to add clusters and regions to your deployment, as shown in the following diagram:

2. Update and roll back apps

Kubernetes allows you to do rolling upgrade of your application to a new container image. This allows you to easily update the running image and also allows you to easily undo a rollout if a problem is discovered during or after deployment.

In the previous lab, we used an image with a v1 tag. For our upgrade we'll use the image with the v2 tag.

To update and roll back:

  1. Using kubectl, you can now update your deployment to use the v2 image. kubectl allows you to change details about existing resources with the set subcommand. We can use it to change the image being used.

     kubectl set image deployment/guestbook guestbook=ibmcom/guestbook:v2

    Note that a pod could have multiple containers, each with its own name. Each image can be changed individually or all at once by referring to the name. In the case of our guestbook Deployment, the container name is also guestbook. Multiple containers can be updated at the same time. (More information.)

  2. To check the status of the rollout, run:

    kubectl rollout status deployment/guestbook

    The rollout might occur so quickly that the following messages might not display:

    $ kubectl rollout status deployment/guestbook
    Waiting for rollout to finish: 2 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 3 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 3 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 3 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 4 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 4 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 4 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 4 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 4 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 5 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 5 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 5 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 6 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 6 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 6 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 7 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 7 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 7 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 7 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 8 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 8 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 8 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 8 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 9 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 9 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 9 out of 10 new replicas have been updated...
    Waiting for rollout to finish: 1 old replicas are pending termination...
    Waiting for rollout to finish: 1 old replicas are pending termination...
    Waiting for rollout to finish: 1 old replicas are pending termination...
    Waiting for rollout to finish: 9 of 10 updated replicas are available...
    Waiting for rollout to finish: 9 of 10 updated replicas are available...
    Waiting for rollout to finish: 9 of 10 updated replicas are available...
    deployment "guestbook" successfully rolled out
  3. Test the application as before, by accessing <public-IP>:<nodeport> in the browser to confirm your new code is active.

    Remember, to get the "nodeport" and "public-ip" use the following commands. Replace $CLUSTER_NAME with the name of your cluster if the environment variable is not set.:

    kubectl describe service guestbook

    and

    ibmcloud ks workers --cluster $CLUSTER_NAME

    To verify that you're running "v2" of guestbook, look at the title of the page, it should now be Guestbook - v2. If you are using a browser, make sure you force refresh (invalidating your cache).

  4. If you want to undo your latest rollout, use:

    kubectl rollout undo deployment guestbook

    You can then use this command to see the status:

    kubectl rollout status deployment/guestbook

    You can review rollout history:

    kubectl rollout history deployment/guestbook
  5. When doing a rollout, you see references to old replicas and new replicas. The old replicas are the original 10 pods deployed when we scaled the application. The new replicas come from the newly created pods with the different image. All of these pods are owned by the Deployment. The deployment manages these two sets of pods with a resource called a ReplicaSet. We can see the guestbook ReplicaSets with:

    $ kubectl get replicasets -l app=guestbook
    NAME                   DESIRED   CURRENT   READY     AGE
    guestbook-5f5548d4f    10        10        10        21m
    guestbook-768cc55c78   0         0         0         3h

Before we continue, let's delete the application so we can learn about a different way to achieve the same results:

To remove the deployment, use

 kubectl delete deployment guestbook

To remove the service, use:

 kubectl delete service guestbook

Congratulations! You deployed the second version of the app. Lab 2 is now complete. Continue to the next lab of this course.

Last updated